(Edited 10/24/19 to change title - Free to good home!)
(** Edited to add price and an unfinished sentence.**)
I've replaced the standard axle on our T@B 320 with the lifted "Outback" axle, so I have the original axle available. The axle weighs over 100 lbs, so shipping would be challenging - thus, I'd prefer to sell it to someone who can come pick it up.
Specs:
rated 3000 lbs
10.5" electric brakes, 5x4.5" pattern
"drop" -> swing-arms are 22.5deg up from the horizontal. (for those curious, the "Outback" axle has 22.5 deg down)
48" between the frame-mount plates.
Dexter tag has the following:
PN 1447179.9
U29 FC 64/49.2 1MM 1B AKSM 10U UL FL 545E
A little beefy for a typical teardrop, but for a standy like the T@B this could be useful.
The mounting plates are tall (say 6"), so there are two 1/2" bolts on either side of the cross-member, and two above it. The T@B frame has a slot for the cross-member, and tapers vertically fore and aft of the axle-mounting position - a good design for a lightweight frame (the axle is Integral to frame strength).
I'll get a few pictures if someone is interested. Axle is from a 2016 T@B we bought used last year. We put 2000 miles on it; the people we bought it from put perhaps 1000 miles on it based on their described usage).
FREE!
Thx,
Jon