Stupid charge controller question

General Discussion about almost anything Teardrop or camping related

Stupid charge controller question

Postby Chasein70 » Tue Mar 19, 2019 1:33 pm

If I put 24 volts into my charge controller instead of 12, does 12 come out the other end to the batteries?
User avatar
Chasein70
Teardrop Builder
 
Posts: 48
Images: 8
Joined: Mon Feb 04, 2019 4:01 pm

Re: Stupid charge controller question

Postby tony.latham » Tue Mar 19, 2019 2:14 pm

Chasein70 wrote:If I put 24 volts into my charge controller instead of 12, does 12 come out the other end to the batteries?


It depends on the controller. My Renogy has a max voltage of 27. It should be in your products specs.

T
User avatar
tony.latham
Gold Donating Member
 
Posts: 6899
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere

Re: Stupid charge controller question

Postby John61CT » Tue Mar 19, 2019 2:16 pm

Most units require reading the target bank at boot up, and that determines their output voltage automatically.

The V input range allowed, and optimal V range for efficiency varies.

MPPT allows higher
John61CT
1000 Club
1000 Club
 
Posts: 1958
Joined: Thu Nov 17, 2016 4:36 pm
Top

Re: Stupid charge controller question

Postby featherliteCT1 » Tue Mar 19, 2019 5:28 pm

My Bogart SC2030 charge controller automatically reads and accepts so called “12 volt” vs. “24 volt” panels (maximum 30 amps); however, a switch must manually be set for 12 volt vs. 24 volt battery systems and another switch must manually be set for AGM vs. flooded batteries.
featherliteCT1
1000 Club
1000 Club
 
Posts: 1124
Joined: Wed Dec 28, 2016 6:54 am
Location: Southern Indiana
Top

Re: Stupid charge controller question

Postby Chasein70 » Thu Mar 21, 2019 2:28 am

Well, after much much searching I found the answer. My EPEVER 80 amp Mppt Solar Charge Controller can take 12v/24v/36v/48v and puts out the correct
voltage for a 12v battery bank.
User avatar
Chasein70
Teardrop Builder
 
Posts: 48
Images: 8
Joined: Mon Feb 04, 2019 4:01 pm
Top

Re: Stupid charge controller question

Postby John61CT » Thu Mar 21, 2019 9:21 am

featherliteCT1 wrote:My Bogart SC2030 charge controller automatically reads and accepts so called “12 volt” vs. “24 volt” panels (maximum 30 amps); however, a switch must manually be set for 12 volt vs. 24 volt battery systems and another switch must manually be set for AGM vs. flooded batteries.
That being a PWM system, does it have the buck / boost conversion capability to allow 24V panels (Voc ~40) feeding a 12V bank, or 12V panels (Voc ~20) feeding a 24V bank?
John61CT
1000 Club
1000 Club
 
Posts: 1958
Joined: Thu Nov 17, 2016 4:36 pm
Top

Re: Stupid charge controller question

Postby featherliteCT1 » Thu Mar 21, 2019 7:25 pm

John61CT wrote:
featherliteCT1 wrote:My Bogart SC2030 charge controller automatically reads and accepts so called “12 volt” vs. “24 volt” panels (maximum 30 amps); however, a switch must manually be set for 12 volt vs. 24 volt battery systems and another switch must manually be set for AGM vs. flooded batteries.
That being a PWM system, does it have the buck / boost conversion capability to allow 24V panels (Voc ~40) feeding a 12V bank, or 12V panels (Voc ~20) feeding a 24V bank?


I do not know ... you would have to read the literature on the Bogart web pages to find out
featherliteCT1
1000 Club
1000 Club
 
Posts: 1124
Joined: Wed Dec 28, 2016 6:54 am
Location: Southern Indiana
Top


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 26 guests