TearTable ... Direct download of plans on Page 7!

General Discussion about almost anything Teardrop or camping related

Postby greekspeedoman » Tue Mar 29, 2011 7:37 pm

This is awesome. Thanks for putting your hard work out there for us to enjoy. I hope to make one in the future. Pictures will be posted if I do. Thanks again!
User avatar
greekspeedoman
Donating Member
 
Posts: 312
Images: 12
Joined: Fri Jul 11, 2008 9:35 am
Location: Coeur d'Alene, ID

Postby Corwin C » Sun Apr 03, 2011 9:12 pm

I found myself looking for ideas today, and ran into this ...

Image

Intriguing to say the least ... convert the design to "tab A into slot B," a little higher back and a fastenerless way of attaching it, Hmmm... :thinking:
Lots of parts though, 1 piece seat & back, 3/4" ply instead of 1/2", a little beefier for us "ample" adults ... what do you think?
Corwin
Image Image Image
If I am unwilling to stand up straight before the world and admit what I have accomplished during the day, without excuses, in complete and honest detail, then I can do better ...
and no one should be expected to accept anything less.
-- myself
User avatar
Corwin C
500 Club
 
Posts: 916
Images: 78
Joined: Mon Oct 19, 2009 10:27 am
Location: Junction, Piute County, UT

Postby Wolffarmer » Sun Apr 03, 2011 9:23 pm

Looks good. I think 1/2 inch baltic would do the trick, to save weight as i doubt if I ever will

:cry:

Randy
"these guys must be afraid of the dark"
User avatar
Wolffarmer
Donating Member
 
Posts: 4612
Images: 309
Joined: Wed May 02, 2007 1:32 pm
Location: Idaho Rupert
Top

Re: TearTable ... Direct download of plans on Page 7!

Postby Corwin C » Sat Mar 03, 2012 8:56 pm

BUMP

Plan now available in Sketchup here. Now, lets get some pictures posted of all those wonderful tables. I'm really curious how many have been built.
Corwin
Image Image Image
If I am unwilling to stand up straight before the world and admit what I have accomplished during the day, without excuses, in complete and honest detail, then I can do better ...
and no one should be expected to accept anything less.
-- myself
User avatar
Corwin C
500 Club
 
Posts: 916
Images: 78
Joined: Mon Oct 19, 2009 10:27 am
Location: Junction, Piute County, UT
Top

Re: TearTable ... Direct download of plans on Page 7!

Postby pete42 » Sun Mar 04, 2012 12:23 pm

corwin I am ashamed to say I have your plans but haven't built one yet.
thanks again for sharing, and one day soon I'll make one.

pete
User avatar
pete42
Super Lifetime Member
 
Posts: 2203
Images: 13
Joined: Sat Nov 07, 2009 11:52 am
Location: SouthWest Ohio
Top

Re: TearTable ... Direct download of plans on Page 7!

Postby DonnRic » Tue Dec 24, 2013 11:32 am

This table seems to be an answer twosome of our space problems. If you could,please send a vy of your plansif you don't mind.
User avatar
DonnRic
Teardrop Inspector
 
Posts: 16
Images: 14
Joined: Sun Nov 03, 2013 6:47 pm
Top

Postby Corwin C » Wed Dec 25, 2013 12:39 am

DonnRic wrote:This table seems to be an answer twosome of our space problems. If you could,please send a vy of your plansif you don't mind.


Here are the links:

This is a simple 3 view of the table: http://www.mikenchell.com/images/TearTableViews.pdf

This is the cutting diagram in inch units: http://www.mikenchell.com/images/TearTableLayout.pdf

This is the cutting diagram in metric units: http://www.mikenchell.com/images/MetricTearTableLayout.pdf
Corwin
Image Image Image
If I am unwilling to stand up straight before the world and admit what I have accomplished during the day, without excuses, in complete and honest detail, then I can do better ...
and no one should be expected to accept anything less.
-- myself
User avatar
Corwin C
500 Club
 
Posts: 916
Images: 78
Joined: Mon Oct 19, 2009 10:27 am
Location: Junction, Piute County, UT
Top

Re: TearTable ... Direct download of plans on Page 7!

Postby Plainsgirl » Tue Dec 30, 2014 9:53 pm

Well I am three years late to this thread but boy oh boy I LOVE your design and can't wait to make it. THANKS!
Kerry
User avatar
Plainsgirl
Teardrop Advisor
 
Posts: 58
Images: 1
Joined: Sun Nov 23, 2014 1:44 pm
Location: Tasmania Australia
Top

Previous

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 13 guests