3/4" Insulation Unavailable - What Now?

Anything to do with mechanical, construction etc

Re: 3/4" Insulation Unavailable - What Now?

Postby tony.latham » Wed Jun 14, 2017 8:43 pm

pchast wrote:John,

Have yo looked at foamys at all... :thinking:
If you glue that 1.5 in. foam to the skins you will
only need some blocks to screw things too in the foam.
The skeleton would be unnecessary.


There's lots of reasons some of us prefer building a teardrop using wooden skeletons walls.

Image

:thumbsup: Strong, lightweight and they'll last for generations if properly constructed.

Tony
Image
User avatar
tony.latham
Silver Donating Member
 
Posts: 2060
Images: 16
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere

Re: 3/4" Insulation Unavailable - What Now?

Postby dwoody » Sun Jun 18, 2017 6:15 pm

mahai217 wrote:So, I decided to build my TD with 1/4" skin, 3/4" skeleton and insulation, and 1/8" or 1/4" interior skin. I purchased Steve Frederick's Shop Manual and working through it and have even bought some of the lumber. I've tried sourcing the insulation but can not find any within 100 miles -- maybe more.

Any ideas? What about getting 1 1/2" and slicing it in half (thickness -- from 1 1/2" to two sheets of 3/4")? Any ideas on how to do this?

I live in the Boise, Idaho area.

Thanks again!

John
:NC

I believe lowes and home depot sell 3/4 Styrofoam.

Sent from my SM-T560NU using Tapatalk
dwoody
Teardrop Inspector
 
Posts: 1
Joined: Thu Jun 08, 2017 4:07 pm

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 3 guests