Page 2 of 2

PostPosted: Fri May 01, 2009 1:25 pm
by Von Pook
Do any of the "box" stores carry "T-molding"?

PostPosted: Fri May 01, 2009 2:53 pm
by Dean_A
Not that I've seen. You can order it from Grant, or you might check some local carpeting/flooring places.

PostPosted: Mon May 04, 2009 2:46 pm
by grant whipp
The T-Molding from the carpeting/flooring stores is not bendable, as bought ... you will need to anneal it if you want to bend it 'round any kind of radius. If you don't need to bend it, then it'll work just fine ...

Good Luck, and as always ...

CHEERS!

Grant

PostPosted: Sat Aug 15, 2009 9:51 pm
by 2bits
I know this is a couple months old but I think it deserves a: GTG"

Go To Grant! :thumbsup:

Re: T-Moulding Install Need Help

PostPosted: Tue Jun 24, 2014 7:25 pm
by Lucky53s
Any chance of reviving this so the pictures show up?

Re: T-Moulding Install Need Help

PostPosted: Thu Jul 31, 2014 4:42 pm
by kootenaytear
Lucky53s wrote:Any chance of reviving this so the pictures show up?

bump to that!

Re: T-Moulding Install Need Help

PostPosted: Tue Nov 18, 2014 12:34 am
by aabowman
I'd love to see those pictures as well. haha.
(looks like the links are broken) :thinking:

Re: T-Moulding Install Need Help

PostPosted: Tue Mar 24, 2015 7:25 pm
by johnandtricia
Why is this even up no pictures and nothing of any real help :cry:

Re: T-Moulding Install Need Help

PostPosted: Mon Nov 02, 2015 4:52 pm
by fcasavant
:? So where the pictures for this thread completely lost? Or are they available? Thanks

Re: T-Moulding Install Need Help

PostPosted: Fri Jan 08, 2021 12:33 pm
by Noc3
use a flexible T molding?

Found this stuff. Thinking about using it on my build as the bottom drip edge.
https://pantherrvproducts.com/105-544-2 ... k-10-feet/

Re: T-Moulding Install Need Help

PostPosted: Fri Jan 08, 2021 2:27 pm
by tony.latham
Noc3 wrote:use a flexible T molding?

Found this stuff. Thinking about using it on my build as the bottom drip edge.
https://pantherrvproducts.com/105-544-2 ... k-10-feet/


That thread is five years old.

"...for custom made tables or countertops."

Sounds like it's for interior use only. UV rays may not be friendly.

T

Re: T-Moulding Install Need Help

PostPosted: Fri May 05, 2023 8:16 am
by Tom&Shelly
Stewered wrote:Any chance of reviving this so the pictures show up?


Show up fine from here. Why do your posts have links to irrelevant sites? Are you getting money from clicks?

Tom