Re: Challenges
Posted: Wed Mar 29, 2017 9:43 amHow'd the two issues come out? I hope you're up and rolling on this project.
Tony[/quote]
Well, the tar is slowly curing - it is what it is. The epoxy finally cured enough so I could start sanding and putting on a few layers of spar urethane. Much has been accomplished, the interior is pretty much done. While I was on vacation last week, hubby starting trimming out the doors, got most of the electrical wiring done, put the next layer of birch on the outside so he'd be ready to lay the roofing material and the galley is framed out. I'll be updating the build page hopefully today. Thank you for asking!
Tony[/quote]
Well, the tar is slowly curing - it is what it is. The epoxy finally cured enough so I could start sanding and putting on a few layers of spar urethane. Much has been accomplished, the interior is pretty much done. While I was on vacation last week, hubby starting trimming out the doors, got most of the electrical wiring done, put the next layer of birch on the outside so he'd be ready to lay the roofing material and the galley is framed out. I'll be updating the build page hopefully today. Thank you for asking!