Page 1 of 1

Revolution Ply

PostPosted: Fri Sep 22, 2017 12:42 pm
by QueticoBill
Anyone looked at or used this? Not rated for exterior exposure but not sure that matters if PMFed or fiberglassed or otherwise skinned. I searched and found one reference regarding cleaning it.

Re: Revolution Ply

PostPosted: Sat Sep 23, 2017 9:29 pm
by JohnSw
I used revolution ply for wall construction on my build. I covered it with epoxy and fiberglass. It is a quality product, very stiff. I was unable to get it to bend on a 30 inch radius. I did call Patriot Timber and found that the glue used in its manufacture is waterproof.