A teardrop without any aluminium.

Anything to do with mechanical, construction etc

Re: A teardrop without any aluminium.

Postby swoody126 » Tue Oct 16, 2018 5:04 pm

MikeG2 wrote:...

Having built up the layers on the flat sides, will overlapping the fibreglass from the top onto the sides produce an invisible join, or do I have to treat this differently?


using staggered/graduated layers as you go over the top edge and down the side when carefully faired the seam wont be seen by anyone butt you a/o a composit boat builder

and it will create a corner that is stronger than you can imagine

AND there will be no avenue for water intrusion!!!

here's an article that may help

http://www.ptwatercraft.com/glassing_edges_corners.pdf

if you've ever done any dry wall taping & bedding you will remember how the tape was smoothed way out from the actual seam by wiping mud away from the seam and when it dried block sanding it

when you go over a corner it is virtually the same you just use thickened epoxy for a fast fairing job that gets painted (thickened epoxy takes on the color of the thickening agent) or un-thickened epoxy for natural finished projects and simply block sand the excess smooth/flat appearing

sw
"we are the people our parents warned us about" jb
swoody126
500 Club
 
Posts: 769
Joined: Mon Feb 22, 2016 6:11 pm
Location: north of Ft Worth

Re: A teardrop without any aluminium.

Postby MikeG2 » Tue Oct 16, 2018 5:27 pm

Brilliant. Thanks for that, sw.
MikeG2
Teardrop Inspector
 
Posts: 21
Joined: Wed Oct 10, 2018 4:45 am
Location: Suffolk, England

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 9 guests