Tongue box layout

Anything to do with mechanical, construction etc

Tongue box layout

Postby Mountainhwy4 » Mon Mar 30, 2020 11:42 am

How does everyone have their tongue box laid out? I’m planning on mounting the fuse block/master fuse/master switch to a board and securing the board to the wall of the tongue box, but should I drill through the box to secure the board to the wall?

I’ll also have the battery in there, mounted on a separate board on the floor of the box.

Any other useful things I should be putting in the box? I figured having the chocks in there would also be useful.
Mountainhwy4
Teardrop Inspector
 
Posts: 5
Joined: Sat Dec 10, 2016 8:10 am

Re: Tongue box layout

Postby Aguyfromohio » Mon Mar 30, 2020 12:14 pm

We have three things in our tongue box:

- battery
- inverter charger
- all wiring connections and disconnect switches

We put out connections on terminal blocks screwed to a piece of wood, and then screwed the wood right through the tongue box, the same as your are planning.
User avatar
Aguyfromohio
Gold Donating Member
 
Posts: 373
Images: 68
Joined: Sun Jan 29, 2017 5:02 am

Re: Tongue box layout

Postby PCO6 » Mon Mar 30, 2020 3:19 pm

I had to drill a few holes in my box but for the most part I used heavy duty Velcro to attach the wood liner to the metal walls of the box.

Image
User avatar
PCO6
Teardrop Advisor
 
Posts: 72
Joined: Mon Jan 19, 2015 5:08 pm
Location: Newmarket, Ontario
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 5 guests