PMF paper mache styie
Posted: Sat Aug 05, 2023 11:59 am
Has anyone tried doing a paper mâché style PMF covering on their project. My idea would be to cut strips may be 12“ x 24“ then laying them out after they’ve been saturated in Tightbond. I realize my trailer would be covered with random seams.
However, corners and roof edges should be simple to cover, and the possibility of wrinkles might be almost 0. After they are initial layup, and several coats of paint, I would think the result would be the same as using large cumbersome pieces.
The big drawback of course cutting a trillion pieces of fabric. Has anyone attempted this?
Or have I simply lost my mind.
However, corners and roof edges should be simple to cover, and the possibility of wrinkles might be almost 0. After they are initial layup, and several coats of paint, I would think the result would be the same as using large cumbersome pieces.
The big drawback of course cutting a trillion pieces of fabric. Has anyone attempted this?
Or have I simply lost my mind.