PD4135 fuse question

Anything electric, AC or DC

Re: PD4135 fuse question

Postby Padilen » Thu Mar 09, 2017 7:39 pm

I'm not sure if your's is like my PD4045, or not. But on mine the 2 red wires are for larger fuses up to 30's and the black wires are smaller up to 20's.
Image
My wires were also marked for which fuse they connect to.
Hope this helps


Sent from my iPhone using Tapatalk
Padilen
Donating Member
 
Posts: 1411
Joined: Fri Jan 30, 2015 4:20 pm

Re: PD4135 fuse question

Postby rflowers82 » Thu Mar 09, 2017 8:28 pm

All I know, is according to my wiring diagram (which someone else posted above earlier) the 2 outer wires RED & WHITE are connections from the battery..? That would mean the extra red wire is for a larger fuse as you stated

I'm also assuming the (WHITE) BATTERY/CHASSIS GND wire will be connected (wire cap) to the metal ground wire in the coach? I thought it would go to a negative insulated wire, but all I see is a bare metal wire that is attached to my current converter grounding bar. Does any of this sound correct?

Thanks,
Ryan
rflowers82
Teardrop Inspector
 
Posts: 3
Joined: Thu Mar 09, 2017 4:08 pm

Re: PD4135 fuse question

Postby Padilen » Thu Mar 09, 2017 8:56 pm

Well I read the link and that's how I also assume it means but I'm no expert. Hopefully others will pitch in. I'll see if I can send help your way.


Sent from my iPhone using Tapatalk
Padilen
Donating Member
 
Posts: 1411
Joined: Fri Jan 30, 2015 4:20 pm
Top

Re: PD4135 fuse question

Postby flboy » Thu Mar 09, 2017 9:49 pm

What is the specific question? I a not following this well?
Don (Flboy)

Current Build CTC:
viewtopic.php?f=42&t=65498
Old CTC Build (sold)
viewtopic.php?f=42&t=50647
YouTube Videos of Finished Trailer:
https://www.youtube.com/watch?v=FASF-x9ofMY - Interior
https://www.youtube.com/watch?v=wb-pvBbyyBs - Exterior
User avatar
flboy
Silver Donating Member
 
Posts: 2397
Images: 376
Joined: Tue May 15, 2012 6:13 pm
Top

Re: PD4135 fuse question

Postby willyr » Wed Sep 12, 2018 3:15 pm

Just got a pd4135 trying to finish up the wiring using the pd diagram here https://www.progressivedyn.com/wp-conte ... manual.pdf . probably an obvious question but bear with :D What am I supposed to do with the wire labeled 'CONVERTER HOT (BLACK)' in the diagram? Appreciate any info thanks.
willyr
Teardrop Inspector
 
Posts: 1
Joined: Sun Feb 02, 2014 2:40 pm
Top

Re: PD4135 fuse question

Postby Dano-Mich » Thu Sep 13, 2018 6:50 am

willyr wrote:Just got a pd4135 trying to finish up the wiring using the pd diagram here https://www.progressivedyn.com/wp-conte ... manual.pdf . probably an obvious question but bear with :D What am I supposed to do with the wire labeled 'CONVERTER HOT (BLACK)' in the diagram? Appreciate any info thanks.

That goes to a 120v circuit breaker. I wired mine into a 15amp breaker. So first breaker slot is a 30amp for hot coming in. I used second slot for 15amp converter hot, then used the third slot for a another breaker supplying power to outlets.
Dano-Mich
Teardrop Advisor
 
Posts: 64
Images: 27
Joined: Wed May 14, 2014 5:05 pm
Location: Michigan
Top

Re: PD4135 fuse question

Postby absolutsnwbrdr » Thu Sep 13, 2018 1:35 pm

PD4135 Wiring-sm.jpg
PD4135 Wiring-sm.jpg (176.16 KiB) Viewed 32 times
Zach

ImageImageImage
User avatar
absolutsnwbrdr
Donating Member
 
Posts: 2632
Images: 410
Joined: Mon Jan 25, 2010 6:10 pm
Location: Hanover, PA
Top

Previous

Return to Electrical Secrets

Who is online

Users browsing this forum: No registered users and 2 guests