I'm planning on running 14AWG wire for all my circuits. Just seems easier than to start buying all different wire sizes. (any comments about this "strategy" are welcome )
HOWEVER...... I'm using a Maxxair fan which I'll put on a dedicated circuit. The fan, running at its highest setting will pull 2.68 amps. I'm planning to use a 5 amp fuse for that circuit.
My question: Is it okay to still use the 14AWG wire or should I downsize it to, say a 16AWG. The length of the run (round trip) will probably be around 12 feet.
thanks.
John