Hello.... I've got a positive and negative wire coming from the fuse box. I want to branch off from that wire to feed 3 outlets in parallel.
I'm looking for a suggestion for either a bus bar or terminal block (not sure which) that will let me attach the 2 main wires (one pos and one neg)
and then be able to feed 3 other wires from that block to the 3 outlets. Kind of like a butt connector but some thing that will handle the 4 wires (4 neg and 4 pos).
Preferably something that will not have to be screwed down, I can just leave it loose in the ceiling (like a butt connector). Hopefully I'm explaining all this
correctly and understandable.
thanks
John
EDIT: I guess, never mind, regarding the above. I think I can use butt connectors. I have some (Multi wire connectors) where one 14 wire goes in one end and you can have 2 coming out other end.
If I add an extra butt connector to the mix, then I can get the 3 total wire outputs I need.