Hey all!
I just installed all my wiring and I had a question to make sure I did things correctly. The 7 pin connector goes into a junction box near the a frame, one of the wires is 'ground' and this wire I screwed into the frame from the junction box using an o-ring connector, the 7 pin ground wire goes into the junction box then a wire goes from there into the frame. The tail lights (they come with side marker lights) also have a ground for each and I screwed those into the frame as well.
The electric brakes (timbren 3500lb brakes) have a ground, this was screwed into the frame. Am I missing anything? My electrician friend told me there is 'ground' and 'grounding' wire, but I'm honestly confused about what that even means, so now I'm worried I did something wrong. I'll be able to test stuff tomorrow (been raining all day and I need to turn the trailer around in my garage before I can plug it in), but before I plug anything in, I'd like to see if anyone here can verify my work that was stated above.
Thanks all!