I got the power panel yesterday & labelled the pigtails sticking out the back for later on, so I know which fuse works for which circuit. I was using a multi-meter to test resistance at the fuse holder & bare wire end for labels.
One thing I'm curious about, I tested continuity at the battery connections ("power in" minus & plus) and was surprised to see continuity between the hot & ground. The battery "in" lug (hot-black) is the one with the buss bar attached. The one immediately to the left of it is labelled "battery negative" (white) in the picture with the three lugs in a row on the board. Just wondering why there would be any connection between these lugs, as I would expect a "0" between hot & ground at the battery input. What am I missing here?