I think I have wired something up wrong. My 110 circuits work when I am connected to shore power. But when I unplug it and go off the fully charged battery, They go dead.
I have the main circuit breaker connected to the black shore power, white and green going to their respective terminals on the PD4045. The second circuit breaker black goes to the 120 bus on the right side of the 4045. a third CB powers a galley GFCI which in turn runs to a cabin USB and 120 outlet and a couple lights. That's all I am running on 120. The 12v side works fine.
Without shore power, I am getting multimeter readings on the black and whites leading from the 12v fuse panel to the converter but on the power coming out of the converter, to the bus strip, no 120.
Any ideas?
Thanks
Don