I'm just finishing up the build of my teardrop and now in the 11th hour I have an electrical question.
I have a portable solar panel I can connect to my AGM solar battery to use when boon-docked. I have a trickle charger that will maintain an AGM battery when I'm plugged into 120V shore power to keep it topped off. And I have my F250 hooked up to the battery through the seven pin connector so it will charge as I drive.
Someone mentioned to me that it can be hard on the truck or truck battery or the AGM battery if both the truck battery and the trailer battery are not the same. The truck battery is a lead/acid battery.
Can someone shed a little light on this before I fry something?
Thank you,