Teardrops n Tiny Travel Trailers

I've made a couple of the penny stoves from Heineken cans and have found them great for lighting charcoal using a chimney starter instead of using crumpled newspaper. It really gets the coals started in a hurry.

jimmymack49 wrote:I've made a couple of the penny stoves from Heineken cans and have found them great for lighting charcoal using a chimney starter instead of using crumpled newspaper. It really gets the coals started in a hurry.

Would these work??

Micro469 wrote:

jimmymack49 wrote:I've made a couple of the penny stoves from Heineken cans and have found them great for lighting charcoal using a chimney starter instead of using crumpled newspaper. It really gets the coals started in a hurry.

Would these work??

They make a great Rocket Stove


http://www.nfdc.net/home/cbdb/Rocket%20Stove/Rocket%20Stove%20Web.htm

Dee Bee

Dee Bee
That is one awsome project.

Mandy

Ron Dickey wrote:The flames from these fuels are practically invisible and if the fuel is spilled near the flames, this can result in a fire catching and spreading very quickly. Handle with care and be sure to have no flammable material around the area of the stove. Do not use a stove such as this near peat sites or tinder-dry vegetation.

This is just sound advice for any and all backpacking stoves. The MSR Simmerlite I use is a white gas stove and the flames are next to invisible when its working properly. I've seen these little alcohol stoves before, but I prefer my MSR stove for some of the harsh conditions I end up in. You just can't drink the fuel....not that I'd be taking many hits off a bottle of Everclear either!

I've made dozens of the penny type stoves. Even sold a few on ebay to boot. It's something good to know how to do in case of a power outage or the like.
I haven't tried the rocket stove, but I like the idea. We used to do something like it with a 25 gallon cast iron pot and a 55 gallon drum cut in half. Great for cooking pintos and chili beans at a pig pickin'.

This is one I use. I made it several years ago and only use it when I go canoe camping and want to hold down the weight. Works pretty good for about 5 min. As said before, I am very careful with it and know it can get out of control.

I wonder if it's possible to fashion a safe teardrop heater out of a rocket stove? (Vented of course!)

Mike...

I built one to the design on this site http://ygingras.net/b/2007/6/a-better-soda-can-stove

I built it for lightweight compact motorcycle tent camping when I did not have room in the saddle bags for my propane stove and cylinders. I need to try some different hole patterns and sizes as I never got mine to boil quick enough. I had plenty of luck heating bottled water to a near boil in chilly low 40's mornings that was perfect for making coffee.

It was also effective enough to make oatmeal in the mornings. That was really all I needed for and packed very small. It was s fun little project.

OK I was to lazy to read all the directions for those that have built one, what purpose does the penny serve?

Jst83 wrote:OK I was to lazy to read all the directions for those that have built one, what purpose does the penny serve?

Basically used for Ultra light backpacking. Weighs only a fraction of an ounce and will boil a liter of water in 4-5 minutes on a couple ounces of Denature alcohol. Primarily used for quick rehydration of dehydrated backpacking meals, teas, coffee, soups, etc.

For TD cooking I think they would be basically useless -- go with a DO and propane stoves.

I have a drawer full and hopefully will soon have an opportunity to try them out "in the field."

Use them VERY carefully. They seem harmless but are so light you can get into trouble with them before you know it.

g

Let me rephrase, What is the purpose of the penny in the penny stove?
I'll for sure stick with the DO

Jst83 wrote:Let me rephrase, What is the purpose of the penny in the penny stove?
I'll for sure stick with the DO

To the best of my understanding - the way I see it work is . . .

There is a hole in the middle of the burner through which the alcohol is filled. The penny serves to block the hole (once the stove is filled) and force the gaseous alcohol out the side burners. Many designs do not have the penny or the enclosed burner. A penny stove will work w/o the penny. Although some say not as efficiently w/o. I can't tell much difference in mine, with or w/o.

I built one with a T-nut in the middle and screwed in a thumb screw in the T-nut after filling and before ignition. That just adds extra weight if you're thinking Ultra Light Backpacking.

HTH's
g

I see, Thank you

Jst83 wrote:OK I was to lazy to read all the directions for those that have built one, what purpose does the penny serve?

Here is an example of a pop can stove. http://www.dailymotion.com/video/x69z0b ... ove_school

I use one similar to this to light my charcoal in my charcoal chimney instead of using paper. like 10 times faster to light charcoal.