Posted:
Fri Jun 01, 2007 4:24 pm
by Mini Renegade
thanks guys, will fire up the jig saw
Re: Step 5: Dryfit the walls
Posted:
Tue Jul 17, 2012 10:03 am
by markhusbands
So the exposed edge of the hatch is thick enough to achieve a decent seal and not be easily damaged? Seems like it might need some kind of edge protection.
Re: Step 5: Dryfit the walls
Posted:
Tue Jun 23, 2015 7:20 pm
by JeffofCT
If there is a true 1/4" overhang on both sides, any reason why one would not try to notch out the inside of the 3/4" ply by the height of the plywood floor/1/2" birch? That would permit the sides to partially rest upon the floor.
Jeff