PSBreen wrote: I was thinking about 1/4" skins over a frame of 1x2" with 3/4" pink foam insulation might be the way to go. Has anybody tried that yet?
Steve
PSBreen wrote:Sure sounds like we should be able to do it. I ordered Steve Frederick's Shop Manual and have started skimming through it. It has ton's of info in it. Between that book and the forums I'm pretty sure we can come up with something we'll both enjoy building. We've got a few home repair projects to get out of the way while we're planning. We are still leaning toward something like the Benroy. Once we decide on a design we can start collecting supplies.
Originally we had considered building a Weekender with 3/4" ply. But at about 75 lb a sheet it would get heavy real fast. It looks like we will save a lot of weight by using built up (framed) walls. I was thinking about 1/4" skins over a frame of 1x2" with 3/4" pink foam insulation might be the way to go. Has anybody tried that yet?
Steve
Return to Trailer and Chassis Secrets
Users browsing this forum: No registered users and 2 guests