by Chip » Thu Jan 19, 2006 7:25 pm
drex,,, had one almost identical to it,,, I cut the extentions down and made the trailer 54" wide to the outside of the frame and shortened it some from the rear to put the axle towards the rear a bit, but I really didnt need to,, I just kept the weight of the original frame in a narrower frame,,It was not a light weight by any means but it did pull really good,, It should be and easy conversion,,, ya get to play with a grinder and make a lot of sparks,,,
have fun and keep the pics coming,,
chipper
Living large,,,travling small !!!
54"x9'4" tear
4'x8' tear
Serro Scotty rebuild(in progress)