by Chip » Sat Jan 28, 2006 11:13 pm
Jim,, this is just my opinion, but If the measurement between the tongue coupler and some point on the wheels, hubs area is same same both sides the trailer will pull straight. but if its out a bit it could posibilly give ya some headaches down the road,,
If the axle is true to the tongue ya can build the camper box so that it slides over the frame and also bolt it down true to the tongue and axle,, Just allow for the 3/16" varience when you position the floor to the frame rails and get it all in line,,or find some way to trim it out if you are building flush to the frame top,, Just hope the tongue is not true to the frame and the axle is slid out of shape,,
good luck and keep us posted on how this one turns out
chipper
Living large,,,travling small !!!
54"x9'4" tear
4'x8' tear
Serro Scotty rebuild(in progress)