Finally was able to make a breakthrough on making curved lines with QCad. My current plan is to build a Weekender on a 4x8 TSC trailer but seeing the curved one on the web site I figured it would be a good way to learn about the program if I had an actual task in mind.
This first successful attempt at using the spline function to round off the sharp corners.
This one I remove the straight lines to better see the profile. You know, it doesn't look bad.
This guy is the basic weekender stretched for a 10 foot trailer and rounded. It's not without charm but not nearly as "right" as the 8 footer.
Now I need to figure out how to enlarge the drawing to full size to cut out the profile. I wonder if there is anybody out there that will plot full size drawings to use as a template.
Courtney