Teardrops n Tiny Travel Trailers

Re: solvent welding the fittings for the toilet and the air vents into the tank:

This link confirms what I’ve read elsewhere on this forum: correct as always. Will verify what type of glue (solvent) is to be used, and roll with it once I’m to that point

http://www.ameri-kart.com/Documents/ABS ... -Inst.aspx

Well, I ground half of the welds that will be visible outside the bathroom. I also installed the framing for the tank! . I still need to final glue the pipes and fittings, but that can wait until after the welding is done. I guess I do need to flip this whole thing on its side and weld the bottom side of the joints too. All in good time.

Next step is to add the frames needed for the tub, the floor, and a door.