HALLMARK 6X12 CONVERSION

Converting Cargo Trailers into TTTs

Re: HALLMARK 6X12 CONVERSION

Postby flboy » Wed Sep 18, 2019 11:50 am

Actually got me thinking about that basin! Redneck hot tub for my CTC when I an hooked up with services. Just need a 12vdc submersible pump to drain into sink when done. Hot tub in the kitchen! Yes! LoL

Been a few times when a long soak in a hot tub after a long day of riding would have been nice!

Is this going too far?? :-)


Image


Sent from my SM-G935P using Tapatalk
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4216
Images: 378
Joined: Tue May 15, 2012 6:13 pm

Re: HALLMARK 6X12 CONVERSION

Postby Tommy B » Wed Sep 18, 2019 12:51 pm

flboy wrote:Tommy, instead of the whole hoop thing, why not get a few light earth magnetic hooks for curtain (maybe 5 or more as desired) and then just screw or glue 5+ metal washers to the roof in circular pattern where you want to attract the magnetic hooks that hold the curtain. No more hoop!Then just stick the curtain up when you want and fold it up and put in drawer when it dries out.

You can get a fabric shower curtain similar to what I use. They dry quick and fold up small and are not stiff plastic.

Could also get a collapsible water catch for basin to eliminate blue bin.

I will edit with magnetic hooks and water catch I have in mind.

Edit.. here you go. All for $50.00. Problem solved. All portable and foldable with no hoop. Could use existing basin of course. But this one would be less confined and is flexible to fit your space. Bonus as it does fold up small for storage.

The hooks in any case solves the hoop dilemma.

BINGO, my thoughts exactly. The curtain rail WILL run behind the small wall as you come in to!



Image





Image





Sent from Tapatalk
Attachments
SHOWERRESIZE.jpg
SHOWERRESIZE.jpg (95.88 KiB) Viewed 4760 times
Tommy B
500 Club
 
Posts: 891
Images: 3
Joined: Sun May 08, 2016 4:37 am

Re: HALLMARK 6X12 CONVERSION

Postby McDave » Wed Sep 18, 2019 4:55 pm

What is that? You smuggling a side o' beef in the shower? :shock:

McDave
User avatar
McDave
Donating Member
 
Posts: 2288
Images: 412
Joined: Sun Jan 25, 2015 5:21 am
Location: Tiny Town, Montana
Top

Re: HALLMARK 6X12 CONVERSION

Postby Tommy B » Thu Sep 19, 2019 7:55 am

McDave wrote:What is that? You smuggling a side o' beef in the shower? :shock:

McDave


Haha, no beef, slim jim maybe!

Slow progress but one more long strip ripped some and then all piece cuts. Uggg.

The light is finally wired right and tight and really bright. :D Ima take off work tomorrow and throw down on this project. The humidity is way down and the weather feels great. :thumbsup:
Attachments
progressresize.jpg
progressresize.jpg (101 KiB) Viewed 4705 times
Tommy B
500 Club
 
Posts: 891
Images: 3
Joined: Sun May 08, 2016 4:37 am
Top

Re: HALLMARK 6X12 CONVERSION

Postby flboy » Thu Sep 19, 2019 1:39 pm

Save some days off for camping! Soon as I get back from Spain next weekend and firm up dates for China trip, we can try to put one on the calendar. Really bummed out next weekend's trip got messed up by work. It just gets in the way of fun!

Btw.. looks like you are ready to reinstall AC cover. Any wires need to be moved or are you okay?

Sent from my SM-G935P using Tapatalk
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4216
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: HALLMARK 6X12 CONVERSION

Postby Tommy B » Thu Sep 19, 2019 2:23 pm

flboy wrote:Save some days off for camping! Soon as I get back from Spain next weekend and firm up dates for China trip, we can try to put one on the calendar. Really bummed out next weekend's trip got messed up by work. It just gets in the way of fun!

Btw.. looks like you are ready to reinstall AC cover. Any wires need to be moved or are you okay?

Sent from my SM-G935P using Tapatalk


wires seem ok for now, thnx, can I get the miter saw tonight? text me plz. thanx
Will save time for camping, yes!
Tommy B
500 Club
 
Posts: 891
Images: 3
Joined: Sun May 08, 2016 4:37 am
Top

Re: HALLMARK 6X12 CONVERSION

Postby Carolina_coast99 » Fri Sep 20, 2019 1:41 pm

Trailer looking great!
Could you please give me some information on your tongue and groove Ceiling material?

I want that exact lumber but I can't seem to find at HD or Lowes websites....I am sure I'm overlooking it.
any specific Information is great.
User avatar
Carolina_coast99
Teardrop Advisor
 
Posts: 77
Images: 3
Joined: Mon Aug 06, 2018 4:35 pm
Top

Re: HALLMARK 6X12 CONVERSION

Postby Tommy B » Fri Sep 20, 2019 6:59 pm

Carolina_coast99 wrote:Trailer looking great!
Could you please give me some information on your tongue and groove Ceiling material?

I want that exact lumber but I can't seem to find at HD or Lowes websites....I am sure I'm overlooking it.
any specific Information is great.


Home depot brother, 6 inch wide , one inch thick, 8 feet long but they come longer.

Still much to be done. Slow and tedious. :?
Attachments
FRIDAYROOFRESIZE.jpg
FRIDAYROOFRESIZE.jpg (70.89 KiB) Viewed 4606 times
Tommy B
500 Club
 
Posts: 891
Images: 3
Joined: Sun May 08, 2016 4:37 am
Top

Re: HALLMARK 6X12 CONVERSION

Postby flboy » Fri Sep 20, 2019 7:15 pm

Looking really nice Tommy! Was that saw big enough to cut the 6 inch planks? I see you got the AC Cover back on... very nice! :thumbsup: :thumbsup:
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4216
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: HALLMARK 6X12 CONVERSION

Postby McDave » Sat Sep 21, 2019 5:22 pm

Probably a little late for this info but here it is... You may find helpful tips
https://www.familyhandyman.com/ceiling/ ... e-ceiling/

McDave
User avatar
McDave
Donating Member
 
Posts: 2288
Images: 412
Joined: Sun Jan 25, 2015 5:21 am
Location: Tiny Town, Montana
Top

Re: HALLMARK 6X12 CONVERSION

Postby hankaye » Sat Sep 21, 2019 7:46 pm

McDave, Howdy;

Wow, that link took me back to the Summer of '72. Working as a Carpenter's Apprentice
and had the wonderful job of laying sub-flooring. These were 'Custom Made Homes" so the
sub floor was 1"X4" T&G laid on the bias and nailed in with 6 penny nails. No nail guns, all
by hand-held hammer. Back then when ya did a days work is really was a days work. When
I was done whit the floor then I had to go below to put in the "X" bracing ya see in "older homes".
Thanks for the memory.

hank
Striving for a less complicated life since 1949 ...
Every day I beat my own previous record for number of consecutive days I've stayed alive.
hankaye
2000 Club
2000 Club
 
Posts: 2567
Images: 1
Joined: Thu Dec 06, 2012 5:35 pm
Location: S.W. New Mexico
Top

Re: HALLMARK 6X12 CONVERSION

Postby Tommy B » Sun Sep 22, 2019 5:44 pm

hankaye wrote:McDave, Howdy;

Wow, that link took me back to the Summer of '72. Working as a Carpenter's Apprentice
and had the wonderful job of laying sub-flooring. These were 'Custom Made Homes" so the
sub floor was 1"X4" T&G laid on the bias and nailed in with 6 penny nails. No nail guns, all
by hand-held hammer. Back then when ya did a days work is really was a days work. When
I was done whit the floor then I had to go below to put in the "X" bracing ya see in "older homes".
Thanks for the memory.

hank


Hank you are welcome. I can appreciate what you experienced I think? Some how satisfying as that next custom fit piece slips into place. That piece that took so much extra thought and out right skill that you must come up with cause there is no easy button here brother. That ONE inch thickness of the planks has really up ended the cabinets, shower curtain and all, the bathroom curtain and god knows what else. These pics show not much new but there is 10 hours today!
Attachments
0922191708 (Custom).jpg
0922191708 (Custom).jpg (139.43 KiB) Viewed 4499 times
0922191708a (Custom).jpg
0922191708a (Custom).jpg (113.5 KiB) Viewed 4499 times
0922191708b (Custom).jpg
0922191708b (Custom).jpg (144.23 KiB) Viewed 4499 times
Tommy B
500 Club
 
Posts: 891
Images: 3
Joined: Sun May 08, 2016 4:37 am
Top

Re: HALLMARK 6X12 CONVERSION

Postby Rainier70 » Sun Sep 22, 2019 8:23 pm

In my 6X12 I used small cup hooks in the ceiling, with the nylon curtain on an eighth inch elastic cord. In my 7X16 I still use some cup hooks and elastic cord for the shower curtain to go over the wall in the shower that isn't frp. The system works well and is easily movable and adjustable.
User avatar
Rainier70
1000 Club
1000 Club
 
Posts: 1083
Images: 244
Joined: Wed Jan 30, 2013 4:35 am
Location: Southeast Idaho
Top

Re: HALLMARK 6X12 CONVERSION

Postby Tommy B » Mon Sep 23, 2019 8:00 am

Rainier70 wrote:In my 6X12 I used small cup hooks in the ceiling, with the nylon curtain on an eighth inch elastic cord. In my 7X16 I still use some cup hooks and elastic cord for the shower curtain to go over the wall in the shower that isn't frp. The system works well and is easily movable and adjustable.


Are the cup hooks permanently screwed in or magnetic? Please. :thinking:

I keep going back to this thought....you know the track like hook system you see in an exam room? Its small, not to notacible, and I would run it from behind the small wall and out into the hoop location, and into a circle. You cant axcidently knock the curtain down, it roles out smooth on those track/rollers.

I have a few of these change rooms at work that have this track/curtain system so I can study this and the only problem I see might be getting track to circle in a 26-30 inch circle.
I will post a pic of this if I can.

Thank You Rainier
Tommy B
500 Club
 
Posts: 891
Images: 3
Joined: Sun May 08, 2016 4:37 am
Top

Re: HALLMARK 6X12 CONVERSION

Postby Tommy B » Mon Sep 23, 2019 8:11 am

Maybe like this track?, come from behind the small wall there! I can make a water proof slot, there is room I think? :thinking:
Attachments
trackhere.jpg
trackhere.jpg (139.43 KiB) Viewed 4439 times
trackoneresize.jpg
trackoneresize.jpg (17.42 KiB) Viewed 4439 times
trackresize.jpg
trackresize.jpg (62.78 KiB) Viewed 4443 times
Tommy B
500 Club
 
Posts: 891
Images: 3
Joined: Sun May 08, 2016 4:37 am
Top

PreviousNext

Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: Bing [Bot] and 7 guests