Re: Another way to skin a cat.
Posted: Sat Apr 08, 2017 4:44 pm
Very Nice! Great Progress!
McDave
Very Nice! Great Progress!
McDave
Teardrops n Tiny Travel Trailers
or t n ttt for short (tnttt.com)
https://www.tnttt.com/
Another way to skin a cat.
Page 8 of 14
Posted: Sat Apr 08, 2017 4:44 pm Very Nice! Great Progress!
McDave
Re: Another way to skin a cat.
Posted: Mon Jun 19, 2017 3:37 amLookin good! Where and how are you running your vents out? I'm still scratching my head on this. The easiest would be to go straight up and out on the curb/door side, but i am afraid of the smells on that side of the trailer and being too close to the door. It's a bit of a pain to get it to the center of the trailer and a huge pain to get it to the driver side. 
You or anyone out there have any thoughts or experiences with stink pipe location?
Where and how are you running your vents out? I'm still scratching my head on this. The easiest would be to go straight up and out on the curb/door side, but i am afraid of the smells on that side of the trailer and being too close to the door. It's a bit of a pain to get it to the center of the trailer and a huge pain to get it to the driver side. You or anyone out there have any thoughts or experiences with stink pipe location?Re: Another way to skin a cat.
Posted: Mon Jun 19, 2017 6:39 amIconfabul8 wrote:Where and how are you running your vents out? I'm still scratching my head on this. The easiest would be to go straight up and out on the curb/door side, but i am afraid of the smells on that side of the trailer and being too close to the door. It's a bit of a pain to get it to the center of the trailer and a huge pain to get it to the driver side.
I used my gray drain line as a vent.
Re: Another way to skin a cat.
Posted: Mon Jun 19, 2017 7:18 amThis is my vent!
Re: Another way to skin a cat.
Posted: Mon Jun 19, 2017 11:32 amThat's a neat idea!!
Re: Another way to skin a cat.
Posted: Mon Jun 19, 2017 12:43 pmThat is a nice design and it definitely keeps the hole off the roof which, if I remember, was one of your design goals. Nice work!
Sent from my SM-G935P using Tapatalk
Sent from my SM-G935P using Tapatalk
Re: Another way to skin a cat.
Posted: Mon Jun 19, 2017 2:38 pmI like that! Very cool idea. So, what other cool stuff have you been holding out on us?
Re: Another way to skin a cat.
Posted: Mon Jun 19, 2017 8:33 pmlow277, Don & Iconfabul8,
Glad you liked the idea. We hope it will work.
Iconfabul8,
"So, what other cool stuff have you been holding out on us?"
Nothing that I'm holding. I've been busy with life and stuff. However! Been working on solving the 'AC through-the floor' problem. I'm 1/2 way there.
Check this out! Changed the whole plan. If it don't work, I'm screwed.
Glad you liked the idea. We hope it will work.
Iconfabul8,
"So, what other cool stuff have you been holding out on us?"
Nothing that I'm holding. I've been busy with life and stuff. However! Been working on solving the 'AC through-the floor' problem. I'm 1/2 way there.
Check this out! Changed the whole plan. If it don't work, I'm screwed.
Re: Another way to skin a cat.
Posted: Thu Jun 22, 2017 5:53 pmThe AC setup is a GO!
Temperature drop was about 26º from the outside in less than 2 hrs. Outside was 106º, ground temperature was 98º and Trailer skin between 112º to 125º (depending how: low, high or which side).
Temperature drop was about 26º from the outside in less than 2 hrs. Outside was 106º, ground temperature was 98º and Trailer skin between 112º to 125º (depending how: low, high or which side).
Re: Another way to skin a cat.
Posted: Thu Jun 22, 2017 5:54 pmRe: Another way to skin a cat.
Posted: Thu Jun 22, 2017 5:54 pmRe: Another way to skin a cat.
Posted: Thu Jun 22, 2017 5:55 pmRe: Another way to skin a cat.
Posted: Thu Jun 22, 2017 5:56 pmRe: Another way to skin a cat.
Posted: Thu Jun 22, 2017 5:56 pmRe: Another way to skin a cat.
Posted: Thu Jun 22, 2017 6:22 pmVery creative solution! How is it working for you? Enough air getting out so as to cool the condensor well enough? The way mine is done, it is essentially the same idea except I exhaust out the side wall instead of the bottom and pull in from up top.
How is it working for you? Enough air getting out so as to cool the condensor well enough? The way mine is done, it is essentially the same idea except I exhaust out the side wall instead of the bottom and pull in from up top.