And so it begins....

[phoenixbound]

Picked up my trailer yesterday. It's a 6' x 12' Tandem V-Nose. Will be primarily used to haul my Tri-Glide to Phoenix and back from Kansas City, but I also plan to add the ability to do some light camping such as in a KOA at Sturgis. I did get the 30 Amp electrical package.

Pic 5.jpg (97.03 KiB) Viewed 1369 times

Pic 4.jpg (84.12 KiB) Viewed 1367 times

[Iconfabul8]

Very nice! Looking forward to your build.

[McDave]

Harley colors, very nice. I hope 6' is wide enough for that TriGlide! ...

McDave

[billbob412]

That was my first thought.I started out with a 12x6 then i bought a ural after changing the bars it wouldn't go through the rear opening

[phoenixbound]

It fit with at least 6" to spare on each side.

I have a ton of things to do next. First of all is get it ready for it's primary mission, hauling the Tri-Glide. Installed rubber floor and wheel chock. Etrack for tie downs next. Ending up using screws and lots of big flat washers. Seemed to hold well when I test loaded the Tri-Glide. I can glue later if it doesn't work out.

Harley colors, very nice. I hope 6' is wide enough for that TriGlide! ...

McDave

[aggie79]

Nice cargo trailer! Congrats.