need a milspec cap

[alex k]

got a 1986 milspec lantern last weekend .it is in good shape , however the cap for the tool and extra stuff is missing .
anyone have an extra the are willing to sell ??????
thanx

[rowerwet]

might help if you put a picture on to help identify what you need

[alex k]

pictures of the part i'm needing .
the cap is about 1.5 " diameter .

[logman7777]

Wont be OEM but i will check with the guys I used to work with to see if we could machine one out of bar stock..Would need OD and thread pitch since I traded the one I had with Kirk (Campmasterk) for a spiffy 200A..

[alex k]

logman ,
hope to find one , but will keep it in mind . will be starting the cleanup of it soon .
where in jersey are you ? lived in ocean co for 25 years

[logman7777]

Im over here in Carneys Point (right by the Delaware Memorial Bridge).

[alex k]

know it well . many trips to deleware.
the "dog house" by new castle airport was the best chilli cheese dog i know of

[logman7777]

Just checked with the guys where I used to work and all they have in round stock is soft aluminum..

[alex k]

found one from a person in california . new /old stock .
thanks anyway for offering

[logman7777]

Cool Beans! Good Luck with the MILSPEC!