Teardrops n Tiny Travel Trailers

In designing my tent on a trailer I will have 1 foot of the bed inside the trailer and 2.75 feet a flap going outside the trailer. There will only be a 3 foot mattress. The other 9 inches is space to the dome tent wall.
What is a good light method of supporting this overhang?
Emt or aluminum tube bent in an upside down u shape?
Should it go to the ground or back to the trailer. I would put this support about 2 feet out from the trailer.

Thanks for any help.

I am not trying to be critical but if you would just continue your original post instead of posting a new topic whenever you have a question you would probably get better responses. Someone may see the whole thread, you might get information a bit a time to answer your question about how to build your trailer and put it all together for a solution.

greygoos wrote:I am not trying to be critical but if you would just continue your original post instead of posting a new topic whenever you have a question you would probably get better responses. Someone may see the whole thread, you might get information a bit a time to answer your question about how to build your trailer and put it all together for a solution.

Ok. I if that works better.