Got some more done today, a few hours of sanding various things, rounding out the spars to ease the bends, etc. I made a couple mounts for the tail lights to screw into, so there is something more substantial than just the shell.
I changed the angle of the galley lights slightly, and built a mount for them, then soldered the wires and heat shrunk the joints.
Before I ran out of steam, I fit the two windows and the entrance hatch. I had cut the holes just a slight bit to small, so some work with the sander to get them perfect and they all fit very snug!
I still need to run the tail light wires, and hide the wires in the cabin, but now I am just waiting for a couple days of warm weather so I can apply the luan skin and start applying the polyester resin. I figure with two warm days in a row, I can give it the first coat on the first day, sand it the morning of day two, and apply coat two on the second day. I want to apply three coats, but at least with two on there, I won't worry about the luan getting wet.
I went to Wally world and bought a quick up shelter since I discovered that the tarp I am covering it with leaks a little. I think with the shelter, and the tarp, I should be good..... and yes I will stake it down. It's supposed to rain here Monday and Tuesday.
I don't expect to get much done next weekend as it is Easter, and both my son's will be away, so no extra hands.