Çelebi (Che-Lebby-spelling En) Mini Caravan building proces

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Postby YuGun » Sat Jun 19, 2010 12:26 pm

Mandy,
Thanks for that surprise.
Ä°t can be meaned written.
Sincelery,
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey

Postby YuGun » Sat Jun 19, 2010 12:44 pm

Bugün yan genişlemeler için sanayiiye gidip 4x4 2mm profil alarak ölçülerine uygun kestirdim.
Sonrasında çalışmaya başladım. Bir ara yağmur geçisi oldu. Çalışma mekanımı toplamadım ve gördüğünüz geçici çözümü buldum.
Image

Image

Image

Tabii şasenin açıkta kalan yerleri ıslandı, Ama olsun zaten boyadan önce iyi bir zımpara gerekecek.
Image

Image

Günün sonunda hem sol hem de sağ yandaki genişlemeleri bitirebildim.
Image
Image

Bugün fren sistemini de kurmayı planlıyordum ama başka bir çalışma gününe kaldı. Genişlemelerin alt yüzleri de henüz kaynaklanmadı.
Image
İşte bugünlük de bunları yapabildim.

Today firs i go to chopper and have been chopped the 4x4cm 2mm steel to steelman.
The i came home and work with wheel out attacments. When it was rainiy for a while. i cant unset the work area and i do this cover for machinery. But chasis's not covered has been wet. No problem we will sand it later.
Ä° hoped to build brake systeim too today but i cant. Ä° am tired and sun is going after hills. Ä° will do it anaother work day. Also the attacment pieces'es under edge weldings not done.
Today its all i could do :(
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey

Postby YuGun » Sun Jun 20, 2010 11:41 am

Bugün fren sistemini kurmakla uğraştım.
Gergili çeki oku, siz frene bastığınızda geri gelerek fren için bir kuvvet yaratıyor.
Yaratıyor ama bu kuvvetin balatalara kadar aktarılması için basit bir mekanizmanın kurulması gerekiyor.
Aslında mekanizma basit ama neredeyse bir günümü aldı doğrusu.

İlk önce fren tellerinin geldiği yere, Frenlerin kılıflarını dışarıda tutacak bir nokta yapmam gerekiyordu.
Image
Image
Bu iş için tam plastiğin montaj yerine uygun iki civatayı kaynattım.
Image
Gördüğünüz tel fren teli koparsa kablonun ucunun yere düşüp tekerlek altına gitmesini önleyecek.
Image
Daha sonra kuvveti tersine çevirecek, Yani itme kuvvetini çekme kuvvetine çevirecek mekanizmamı kurdum.
Image
Bu iş için demir kapılarda kullanılan menteşelerden ve z n in köşelerinde hareketli olabilecek halkalı çelik civata kullandım.
Son olarak da çeki okuna geçen kısmı monte ettiğimde işim bitti.
Image
Evet Çelebi frenlerine kavuştu, Artık istediği yere gidebilir.

Today i work for setup of brakes.
There must be a simple systeim for brakes.
Aktive hinge support some force for barakes.
But that is the problem how this force go to brakes.
First i do a stopper for brake cords.
Then i do the reverser. This convert force push to pull.
And then it is complated.
Ä°t is ready to go everyvhere...
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

Postby YuGun » Sun Jun 20, 2010 12:18 pm

Vee gitti de...

İlk defa arabaya bağlandı...
Image

Ve dışarı çıktı...
Image

Image

Küçük bir test için çok gezdiğim parkurlarda küçük bir tura çıkma vakti geldi...
Image

Vee test sürüşü başladı.

Ne normalde ne de fren esnasında sağa sola çekme yok,
Hafif olmasına ragmen bozuk yollarda hiç zıplamadı,
Çok gezdiğim yollarda hangi vitesi kullanıyorsam onunla çıktım. Ama kalkış süresi biraz uzadı ama çok değil.
Fren mesafesinde belirgin bir fark hissetmedim. Frenler oldukça başarılı, Frenajda da stabil kalması iyiydi.
İlk defa romork kullanmama rağmen hiç zorlanmadım.
Ben nereden gidiyorsam o da oradan geliyor. Kuyruk gibi.
Arabadan daha geniş olmaması büyük rahatlık.
Son olarak da biraz zor olsa da çıktığım bahçeye girebildim.
Herhalde atelaj sürücüsü olarak doğuştan getirdiğim yeteneklerim var,
Ya da bu iş bana anlatıldığı kadar zor değil.
Şaka bir yana gerçekten çocuk oyuncağı ve çok zevkliymiş.
Testimizin olumsuz sonuçlarına gelince...
Amortisörlerin koruma kapakları zaman zaman lastiğe temas edip kendi ekseninde dönmüş olacak ki,
Döndüğümde amortisör somunları gevşemişti. Amortisörler kapaksız takılacak, Herhalde zararı olmaz...

İşte bir haftasonuna daha böyle veda ediyoruz...
Selamlar,

And it goes..
First time towed...
And Go out...
Ä° already drive roads, its time to test drive...

The results...
No sliding left or right normally or braking also har breaking too.
Ä°t is easy to use, Ä° used some gears generally my usual use roads. But accelerating different but no too much. Braking normal.
Ä° drive a towed car first. And its easy and funny.
Ä° like it.
Ä°n Turkey some people says it is too difficult but i dont think so after my first driving.
And negative result. The shock absorbers cyhlindrical plastic covers might be tocuch the wnheel in some positions. Ä° found the absorbers wrench is nearly fall.
Ä° tihink i dont use plastic covers. Ä° think there is no problem with using them without coverage? what do you tink about that?
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

Postby RAYVILLIAN » Sun Jun 20, 2010 5:23 pm

YuGun

Your trailer is looking great your a better builder than I am I have never done the trailer frame. The only problem I would see with leaving the plastic shields off the shocks would be that you might get dust and mud in them and wear them out sooner. You might try turning the wheels around to get clearance but than the tires might ride out side your frame.


Gary :thumbsup:
Where ever we raise the hatch is home.
Darn blank states keep getting further away and we keep traveling slower ain't never gona get this map full.
111961Image
User avatar
RAYVILLIAN
Lifetime member
 
Posts: 1434
Images: 109
Joined: Thu Aug 05, 2004 9:33 pm
Location: Rayville MO
Top

Postby YuGun » Mon Jun 21, 2010 12:47 pm

Raywilian,
Thanks for your comments.
Ä° try to do my best for this project.
The shiels will be cleared when complate sanding.
Thans again.
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

Postby YuGun » Mon Jun 21, 2010 1:05 pm

Bugün yine malzemeciye gidip 1,5mm kalınlığında sac ve tampon için 3x2cm 2mm profil aldım. Öncelikle lambaların takılacağı bölümün ve lamba arkalıklarını sacdan kesip bu işi tamamladım.
Image

Image


Sonrasında da lambaları koruyacak tamponu birleştirip yerine geçici de olsa kaynaklayabildim.

Image

Image

Today i go to shop and buy 3x2cm 2mm profil and 1,5mm steel plate.
Then first i set up the area and attacment plates of taillights,
Then i set up the steel bumper (or cover) for lights.
Today i only can do theese.
Ther is something strange.
Ä° write this times usually my end day report,
Ä° am ending day and go to bed in a couple of hours,
But you are perhaps having lunch,
This is very strange in fact. The world is big.
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

Postby Cliffmeister2000 » Mon Jun 21, 2010 1:21 pm

The world is big, yet you can writ something in turkey and I can read it seconds later in Arizona!

I remember reading that sailors would leave letters in South Afirca in one place for letters going East, and another for letters going West. If going East, they would leave letters headed West and pick up letters headed East. It sometimes took years for a letter to connect with its intended recipient. Sometimes, they never got there at all!
God Bless

Cliff

♥God. ♥People.
1 John 4:9-11

My Teardrop build pictures
User avatar
Cliffmeister2000
Titanium Donating Member
 
Posts: 3622
Images: 157
Joined: Thu Jul 26, 2007 10:18 pm
Location: Phoenix, AZ
Top

Postby YuGun » Mon Jun 21, 2010 1:36 pm

Yes, good story.
Thanks to inventors of internet.
Ä° wish the God saves them.
Sincelery,

Note: you have writen Turkey as a bird name; turkey.
Turkey:Country
turkey: Christimas Meal, a type of non flying bird.
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

Postby Cliffmeister2000 » Mon Jun 21, 2010 1:44 pm

YuGun wrote:Note: you have writen Turkey as a bird name; turkey.
Turkey:Country
turkey: Christimas Meal, a type of non flying bird.


Oops! :oops: My apologies!
God Bless

Cliff

♥God. ♥People.
1 John 4:9-11

My Teardrop build pictures
User avatar
Cliffmeister2000
Titanium Donating Member
 
Posts: 3622
Images: 157
Joined: Thu Jul 26, 2007 10:18 pm
Location: Phoenix, AZ
Top

Postby YuGun » Mon Jun 21, 2010 2:41 pm

No, no problem, I only want to remind it.

:)

Sincelery,
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

Postby YuGun » Sat Jun 26, 2010 10:52 pm

Yoğunluk nedeniyle bir haftadır günlük olarak yazamadım. Bu yüzden bugünkü yazım bir haftalık yapılan işlerin küçük bir özeti olacak.

İlk önce tampon bölümünün sağlamlaştırması yapıldı, Sonra bütün şasedeki kaynak noktaları tekrar elden geçirildi.

Sonra Sacdan yapmaya karar verdiğim iç çamurlukları kestim ve montajını yaptım.
Image
Sonra şasede bazı ucu açık kalan profillere sacdan kapak yapıp kaynattım.

Sonra frenli çeki okunun ana yaylı kısmını üstten kapatacak bir kapak kesip yerine monte ettim.
Sonra ileride geri vites pimi takılacak kısmı ayarladım ve montajını yaptım.
Image
Sonra çamurluk iç ve dışlarında ve şase üzerinde gereken yerlerde Dayson mastikle ekstara izolasyon yaptım.
Image
Bu arada Arabadaki elektrik sisteminin kurulumunu yaptım. Şase ana desteklerden boydan boya geçen kabloyu geçirip, Plana uygun şekilde fişini takıp bağlantılarını yaptım.

Vee son olarak ilk kat primer boyasını attım.
Image
Image
Ve işte bu hafta bunları yapabildim. Aslında planıma göre şu anda bitmiş olmalıydı ama her gün yağan yağmur nedeniyle ancak bunları yapabildim.
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

Postby S. Heisley » Sun Jun 27, 2010 4:11 pm

Congratulations on completing your trailer frame. It looks good and sturdy! :thumbsup:
User avatar
S. Heisley
Super Lifetime Member
 
Posts: 8773
Images: 495
Joined: Mon Sep 17, 2007 10:02 am
Location: No. California
Top

Postby YuGun » Tue Jun 29, 2010 3:01 am

Thanks,
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

Postby YuGun » Tue Jun 29, 2010 3:21 am

Evet, Sonunda ÅŸaseyi Bitirdik,
Aslında yan ışıklandırmalar gibi birkaç aksesuar daha eklenecek ama sonra da yapılabilir.
Åžimdilik ÅŸaseyi bitmiÅŸ kabul ediyoruz.
Ä°ÅŸte fotoÄŸraflar:
Image

Image

Image

Image

Yapım sırasında mesajları ve yorumlarıyla destek olan bütün dostlara teşekkürler,
Yapım süreci birkaç ay içinde üstyapının yapımıyla devam edecek,
Selamlar,

At the end The chasis is complated exept the side lamps etc. some additional parts that is not important too much.
Our building progress will be contunued within a couple of months, we wish.
Now we move another city (For work) and the trailer is ready to go, And we are too much thing to do move our home.
Becauseo f this we take a break of building Çelebi(Chelebby),
The special thanks to all the Friends that they submit their thinks and useful suggestions,
Bye,
User avatar
YuGun
The 300 Club
 
Posts: 445
Joined: Sun Apr 11, 2010 1:25 pm
Location: Turkey
Top

PreviousNext

Return to Build Journals

Who is online

Users browsing this forum: No registered users and 32 guests