The Start of my TD Explorer

[Loader]

Looking good! The ledges behind the tires could come in handy. Any plans for them?

[halo1]

Not yet but they are handy to get up high if you need to.
Have any ideas?

[halo1]

Update from last weekend, I have been working on the galley
my wife wanted a nice place to keep sporks and stuff so I made this niffty set up with built in cutting board.
Picked up the pan at Kmart and its even nonstick lol.

<a href="http://photobucket.com" target="_blank">
<img src="http://i64.photobucket.com/albums/h163/hyboosa/DSC_0240.jpg" border="0" alt="Photobucket"></a>

I was a little nervous but downed a couple of cold ones and started cutting.

<a href="http://photobucket.com" target="_blank">
<img src="http://i64.photobucket.com/albums/h163/hyboosa/DSC_0239.jpg" border="0" alt="Photobucket"></a>

Routered the corners of 1.5x.5 to fit the lip of the pan so that the cut out would set down on the pan flush


Finger hole for easy lifting.
<a href="http://photobucket.com" target="_blank">
<img src="http://i64.photobucket.com/albums/h163/hyboosa/DSC_0242.jpg" border="0" alt="Photobucket"></a>


Here is a shot from the inside, the luane 1/8 wood is not to easy to work with on tight bends but it worked out good with a air nailer with small staples. Here is my hatch and even has an quick pull for emergency look outs or bail outs haha.
<a href="http://photobucket.com" target="_blank">
<img src="http://i64.photobucket.com/albums/h163/hyboosa/DSC_0238.jpg" border="0" alt="Photobucket"></a>

Sorry about the html code in the pictures not sure whats going on with photobuckets converter.

So what do you think???????????

[whtknight]

Coming out great... great attention to detail and the learning experience continues....