Teardrops n Tiny Travel Trailers

by **GeoDrop** » Wed Mar 23, 2011 7:59 am

LDK wrote:I don't think I'll be making my ribs out of that 3/4" ply I have. After cutting it out I found out it has major void issues.

by **LDK** » Wed Mar 23, 2011 6:06 pm

I'm close to being done with the galley. Maybe I should have done that pesky ole hatch lid first.

by **S. Heisley** » Wed Mar 23, 2011 9:15 pm

Pretty!

Nice job!

by **LDK** » Thu Mar 24, 2011 8:44 pm

Well I got the ribs cut out and they seem pretty stout. That southern yellow pine is gonna work out good for me. I framed it up and left a 1/4" gap all around but the bottom has alittle bit bigger gap,

--measurement error--. I sure hope I can work around it. :thinking:

by **CliffinGA** » Thu Mar 24, 2011 8:48 pm

Larry can you make the bottom cross piece thicker to fix it? Or add to it?

Cliff

by **LDK** » Thu Mar 24, 2011 8:50 pm

CliffinGA wrote:Larry can you make the bottom cross piece thicker to fix it? Or add to it?

Cliff

I was thinkin the same thing Cliff

by **CliffinGA** » Thu Mar 24, 2011 8:54 pm

better yet make the top thicker as thats where most of the weight and stress will be on the hatch right?

Cliff

by **LDK** » Thu Mar 24, 2011 9:00 pm

CliffinGA wrote:better yet make the top thicker as thats where most of the weight and stress will be on the hatch right?

Cliff

I'm gonna add more oak to the top and bottom anyway but I could probably glue a really thin piece to the bottom to close up the gap alittle. Just by looking at it , it looks like maybe 3/8" when I was shootin for 1/4". :thinking:

by **CliffinGA** » Thu Mar 24, 2011 9:31 pm

Arry how much did you notch your sides for your hatch? 3/8"?

Cliff

by **LDK** » Thu Mar 24, 2011 9:46 pm

CliffinGA wrote:Arry how much did you notch your sides for your hatch? 3/8"?

Cliff

It's pretty much 1/4" except for the bottom. I used 1/4" shims all around it.

by **Loader** » Thu Mar 24, 2011 9:55 pm

Looks good Larry. The pine should work out well. Agree laminating a little extra shim piece should take care of the gap.

by **LDK** » Thu Mar 24, 2011 9:57 pm

Cliff,

If you can you should try using a 2x10 or a 2x12 southern yellow pine board to make your ribs out of. If your rib profile isn't too wide. I paid only $14.00 for the board I used. :thumbsup:

by **LDK** » Thu Mar 24, 2011 10:04 pm

Loader wrote:Looks good Larry. The pine should work out well. Agree laminating a little extra shim piece should take care of the gap.

Thanks Earl, I guess when I'm ready to skin and hinge it I'll add what is necessary to close the gap alittle.

by **LDK** » Fri Mar 25, 2011 6:29 am

CliffinGA wrote:Arry how much did you notch your sides for your hatch? 3/8"?

Cliff

Cliff

I didn't answer your question right the first time. I used a 5/16" rabbeting bit to notch the sides out and then used a pattern bit and took out the rest of the material. I learned that from aggie 79 and it really turned out well.

my camera sucks. I really need to get a new one. :lol:

by **Jst83** » Fri Mar 25, 2011 10:56 am

LDK wrote:I'm close to being done with the galley

Nice galley :thumbsup:

Is that stained wood you did, if so what kind of wood and stain. I really like the color

Teardrops n Tiny Travel Trailers

Camp Critter update 6/16/13-new canopy

Who is online