I have canvased the ceiling and installed lights. the next step
would be to finish inside walls. All wiring is grooved into the foam
and spackled.
I've been considering a roof rack. I'm going to inset wood blocks
to provide it support in the wall before canvas there, in case I do.
GASKETS... I purchased the gasket from Grant. It does squeeze
to almost nothing when pinched, NOT by my door. It would require a
roughly 3/16 space with the foam door. I shimmed the hinge out to
test this.
The Door is a problem. I Should Have made a hard corner for the top
and bottom edges, more than just square foam.
Perhaps flashing under the canvas is the answer for others in the future.
Or.... my second.