What is inside the front wall? The outside face is 3/8" plywood, with 1x2 studs separated by 3/4" Owens Corning FOAMULAR® 250 Rigid Foam insulation, 1/4" plywood inside face.
Cut outs for the windows. Cut all 4 walls at once. The windows are 6" x 8" two per side. The windows should be eye level when sitting inside the trailer. These are to be Wiley windows. I wish I could find the metal frames for the Wiley windows.
Last edited by hiker on Sun May 11, 2014 8:53 pm, edited 1 time in total.
Inner walls and outer walls cut for Wiley windows. The trailer front on left of photo. The windows are 6" x 8" two per side. The windows should be eye level when sitting inside the trailer.
Front wall, left and right forward walls, and roof spars #2 and #3 are in place. Glued down insulation for left side rear wall. Getting measurements for rear lights.