M116A3 Build

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Re: M116A3 Build

Postby lfhoward » Wed Jan 24, 2024 10:25 pm

This weekend I rented a stall at a DIY garage to get some work done on the Jeep Liberty in a heated space. (I could actually see renting this space to work on the trailer too, if it is rainy or cold out.)

Some repairs on the Jeep this weekend include:
    Water pump & thermostat
    Oil change and tire rotation
    Rear shocks and sway bar links
    Fix a blinker that has a bad ground
    Tack up a loose exhaust heat shield

Some more repairs and mods for another day include:
    Replace leaking steering rack
    Front limited slip differential install
    Rear locking differential (lunchbox type) install
The Jeep now has 217,000 miles and I will eventually be keeping it as my work/trail rig when I retire it from daily driver duty. It’s got some serious off road stuff to do this summer for work, thus the lockers. Regearing it to a lower ratio would also be nice. It’s got a 4 inch lift, skid plates and recovery points already. This Jeep has been my other fun hobby along with building the trailer. Last summer I rebuilt the front suspension from the ground up.

Image

Image
My off-road camper build on an M116A3 military chassis:
http://www.tnttt.com/viewtopic.php?f=50&t=62581
Tow vehicle: 2008 Jeep Liberty with a 4 inch lift.
User avatar
lfhoward
1000 Club
1000 Club
 
Posts: 1370
Joined: Wed Jan 22, 2014 6:10 pm
Location: Philadelphia, PA

Previous

Return to Build Journals

Who is online

Users browsing this forum: No registered users and 62 guests