Update #9
4-23-16
So today my goal was to get all the cabinets finished I decided on making simple shaker style cabinet doors , this was my first time making cabinet doors and I am really happy how they turned out , the galley cabinets open normally but the interior cabinets open towards the ceiling
I made them out of 1x4 fir boards I ripped down to 1x2s and then cut a 1/4" groove down the center to accept the plywood center. I made them with traditional styles and rails with mortise and tenons
This was my plan for what I wanted the doors to look like
This was my first glimpse of what they would look like
Bottom doors all finished and hung came out way better than I expected.. Still need the stainless door pulls
Top galley cabinets all finished.
thats not stove installed just the cover to make sure the cabinets have room to open up over it
Interior cabinet doors all finished
I found these hinges at habitat 4 humanity for 50¢ each which was perfect for the over head opening
Well that's all for today next on my list is either the ceiling or installing the stove and sink. The stove is off Amazon and the sink I got the idea from a fellow member on here , its a half steam pan 6" deep from a kitchen supplies store that I am going to install a drain in , it was $9 and a typical stainless sink is way more than that
Thanks for looking
Sent from my SM-N920P using Tapatalk