I started, then paused my build
viewtopic.php?f=50&t=73997. I come in with no prior metal or carpentry experience. I'm learning everything as I go. I browsed through your posts, watched your videos. I'm learning a lot. My trailer frame is 5x8, TV is 2018 JLU Rubicon. I'm looking at 37" tires for the trailer to match the TV. I also use Timbren. The combination is creating some challenges. As of now, my frame will be 24" off the ground. I got a few questions, hope I may hear from you.
1. what's your solution with the stabilizer jacks? I couldn't quite tell. Are stabilizers important based on your experience?
2. for the roof racks, did you just bolt them on to the plywood? I don't see you used studs on your walls. what's the estimated weight limit you can put on the roof racks? How many inches did the racks raise your camper height? I'm guessing ~7".
3. did you install your AC inside the tongue box? I see you have 2 vent holes on the side wall, not sure how they are connected to your AC.
Look forward to hearing from you. Thank you very much!