A tear with no name

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Re: A tear with no name

Postby QueticoBill » Sun Aug 06, 2017 8:07 am

Update. Chassis is finished. Modified Ironton 5 x 8 as I planned. I keep tweaking cabin design but it will be based on the original trailer for two profile, with a deck that keeps ending up in the 9-6 to 10' range. And I committed to it sitting on top of chassis and being removable.

So chassis drawings:

170806 FRAME SECTION.jpg
170806 FRAME SECTION.jpg (47.62 KiB) Viewed 1252 times


170806 FRAME PLAN.jpg
170806 FRAME PLAN.jpg (46.65 KiB) Viewed 1252 times
Last edited by QueticoBill on Sun Aug 06, 2017 8:39 am, edited 1 time in total.
QB
A tear with no name: viewtopic.php?f=50&t=67624
QueticoBill
Silver Donating Member
 
Posts: 1183
Images: 22
Joined: Sun Apr 14, 2013 7:22 am
Location: Clayton NY

Re: A tear with no name

Postby QueticoBill » Sun Aug 06, 2017 8:28 am

And some photos.
IMG_20170806_080505.jpg
IMG_20170806_080505.jpg (292.97 KiB) Viewed 1259 times


Coupler attachment: Slipped the 2 x 2 through the inverted factory coupler attachment plate - 4 bolts - 2 vertical and 2 horizontal.
IMG_20170806_080422.jpg
IMG_20170806_080422.jpg (217.67 KiB) Viewed 1259 times

The coupler was for 2 1/2" so I added 1/4' steel plate shims on either side - approximately 2 x 4 inches.
IMG_20170806_080433.jpg
IMG_20170806_080433.jpg (163.6 KiB) Viewed 1259 times
QB
A tear with no name: viewtopic.php?f=50&t=67624
QueticoBill
Silver Donating Member
 
Posts: 1183
Images: 22
Joined: Sun Apr 14, 2013 7:22 am
Location: Clayton NY

Re: A tear with no name

Postby QueticoBill » Sun Aug 06, 2017 8:30 am

8' - 2 x 2 x 1/4 tongue attachment - the holes in the Ironton framing were already there so only drilling tongue. I should have used 1/3" or 3/16" max. The worksheet in design resources here said the 1/8" would have been 150% of what was required and the 1/4" was 400%! Overkill - but the price could not be beat.
IMG_20170806_080446.jpg
IMG_20170806_080446.jpg (169.22 KiB) Viewed 1257 times

IMG_20170806_080451.jpg
IMG_20170806_080451.jpg (270.44 KiB) Viewed 1257 times
QB
A tear with no name: viewtopic.php?f=50&t=67624
QueticoBill
Silver Donating Member
 
Posts: 1183
Images: 22
Joined: Sun Apr 14, 2013 7:22 am
Location: Clayton NY
Top

Re: A tear with no name

Postby QueticoBill » Sun Aug 06, 2017 8:36 am

Finally, the change to underslung axle and raising fenders on the frame. Drilling the spindle for the stud on the spring was easy, as was inverting spring bolt. Moving it rearward was harder, because of cutting for carriage head bolts - which was a combination of sabre saw and file.

IMG_20170806_080530.jpg
IMG_20170806_080530.jpg (237.87 KiB) Viewed 1254 times


IMG_20170715_133927.jpg
IMG_20170715_133927.jpg (133.52 KiB) Viewed 1254 times


I (had a friend with a man cave machine shop) modify the fender brackets so the tab for the bolt to frame was down, not up, and of course drilled frame for relocated fender.

IMG_20170806_080546.jpg
IMG_20170806_080546.jpg (146.53 KiB) Viewed 1254 times
QB
A tear with no name: viewtopic.php?f=50&t=67624
QueticoBill
Silver Donating Member
 
Posts: 1183
Images: 22
Joined: Sun Apr 14, 2013 7:22 am
Location: Clayton NY
Top

Previous

Return to Build Journals

Who is online

Users browsing this forum: Google [Bot] and 15 guests