rjgimp wrote:I am planning on PMF exterior for a few specific reasons...
1) I am no craftsman and that method appears to be the most idiot proof.
B) I am not much concerned with a fine mirror finish and have little confidence in my ability to create one due to my above mentioned shortcoming, and of all the types of skins I am aware of PMF has the potential to look the least bad when applied by an incompetent dufus like myself.
Fourthly, PMF can easily be repaired in the field if need be with tools and supplies that would fit in an ice cream pail.
iconicflux wrote:Update:
Went to check out some of the trailers today and discovered that one of the Coleman's is actually a 15' trailer. Should be getting that one as soon as I can get them to strip it.
If anyone else here is looking for inexpensive trailers for their build, hit me up. This place has a number of 9-11' trailers and I'm happy to go inspect them for you.
TwilaR wrote:iconicflux wrote:Update:
Went to check out some of the trailers today and discovered that one of the Coleman's is actually a 15' trailer. Should be getting that one as soon as I can get them to strip it.
If anyone else here is looking for inexpensive trailers for their build, hit me up. This place has a number of 9-11' trailers and I'm happy to go inspect them for you.
What area are you in?
stcyrwm wrote:Also following this closely. I am looking at starting a build in the next couple months. I was thinking 6 or 7 x 12 with a pop top and maybe a rear slideout.
Do you have mechanicals figured out at all for pop up and slide outs?
Congratulations on getting started!
Sent from my SM-G935V using Tapatalk
Users browsing this forum: No registered users and 42 guests