Hi all,
I have lurked and posted and asked for help a few times during my slow build of a TD based on Tony Latham’s book. I was true to the profile he used along with his hatch design and many of his construction methods, but also made quite a few changes. Many of the changes were to save weight as I will be pulling with a Subaru Forester. I weighed it yesterday using the bathroom scale/lever method and came up with 930 pounds. Pretty good for a 5x10.
I will split this up into a few posts so there are not too many photos per post. TD is fibreglass/epoxy with acrylic paint. Converted aluminum snowmobile trailer as the base. 1” rigid foam with skeletonized panels throughout.
Hopefully the pics tell most of the story.
Bret
Sent from my iPhone using Tapatalk