Re: Fiberglass and resin really stick to foam??
Posted: Tue Nov 20, 2018 10:02 pm
This subforum is afaict about PMF, I believe not much here on epoxy nor fiberglass.
Poor Man's Fg, cheap canvas + Glidden Gripper and/or Titebond II stuck to foam board.
Usually for small teardrops, total weight maybe 1-2000 wet, often crazy lighter.
Usually starting with a Northern Tool or Harbor Freight as a base, or welding from cheap even scrap angle and an old axle off CL for $50.
In other words, lots of us (I perceive) are intentional escapees from the "costs a lot, looks so polished" school of trailer construction.
Of course there are exceptions, anything goes, all are welcome.
Unfortunately, there is no organized intro / quick overview to the HowTo details (yet / anymore), but when you've got some time 8-) look for the longest oldest threads and start there.
Poor Man's Fg, cheap canvas + Glidden Gripper and/or Titebond II stuck to foam board.
Usually for small teardrops, total weight maybe 1-2000 wet, often crazy lighter.
Usually starting with a Northern Tool or Harbor Freight as a base, or welding from cheap even scrap angle and an old axle off CL for $50.
In other words, lots of us (I perceive) are intentional escapees from the "costs a lot, looks so polished" school of trailer construction.
Of course there are exceptions, anything goes, all are welcome.
Unfortunately, there is no organized intro / quick overview to the HowTo details (yet / anymore), but when you've got some time 8-) look for the longest oldest threads and start there.