Jigs and tables

Here's where we keep the polls, and anyone can start a poll!

did you create a Jig or mount or table for the Job?

Jig ... expand or show picture below.
0
No votes
Table ... saw horse ... pictures or describe below
2
67%
I saw a really good idea ....Expand.
0
No votes
Pullies or wentch
0
No votes
I made a tool ... joined several camps or welded a frame
1
33%
 
Total votes : 3

Jigs and tables

Postby Ron Dickey » Wed Jan 19, 2005 9:39 pm

In creating your teardrop did you create any Jigs or cutting tables that you would like to share.

Mike Came up with a building table ... and you??

http://www.mikenchell.com/images/step2.jpg

to bad you can not vote for more then one but you can add it below.

Maybe you have a tool or frame you used on your tear that you used at work or for other projects in your shop that you never really thought about until now.

Thank Ron D.
121377......134179
Inside almost done--Trolly top has opening windows & roof.doors need assembling--pictured above waley windows..galley 1/3 done
Cross Bow in Build Journals....http://www.tnttt.com/viewtopic.php?f=50&t=54108
User avatar
Ron Dickey
Silver Donating Member
 
Posts: 3069
Images: 711
Joined: Tue Apr 20, 2004 5:56 pm
Location: Central Coast, CA

Postby Ron Dickey » Wed Jan 19, 2005 10:02 pm

In one of my woodworking mags it showed a spray booth. so fumes would not get every where.

This might work where you are using something that is flamable or like me your hotwater heater is in the same room.

PCV pipe cut to build and connected to frame corner joints

take clear plastic likt painters plastic ... but I think they used thicker plastic.

then they got zippers that comes with stickum tape on the sides ... stick it to the plastic and you have a booth with a zipper door.

Here is a huge one
www.oya.com/service/ paintbooth.html
here is one using close pins
http://members.thegateway.net/cfd/Airpl ... tbooth.jpg

they might help when you use those harsh glues if you are not outside.
121377......134179
Inside almost done--Trolly top has opening windows & roof.doors need assembling--pictured above waley windows..galley 1/3 done
Cross Bow in Build Journals....http://www.tnttt.com/viewtopic.php?f=50&t=54108
User avatar
Ron Dickey
Silver Donating Member
 
Posts: 3069
Images: 711
Joined: Tue Apr 20, 2004 5:56 pm
Location: Central Coast, CA

Postby asianflava » Thu Jan 20, 2005 2:32 am

I can't find his website but a buddy made one of these booths. He used computer fans to exhaust it. I was busting his chops because they weren't the sprakless fans made for paint booths. He is building an RV7A (airplane) so he as to prime/paint parts as he goes along.
User avatar
asianflava
8000 Club
8000 Club
 
Posts: 8412
Images: 45
Joined: Mon Aug 02, 2004 5:11 am
Location: CO, Longmont
Top


Return to User Polls

Who is online

Users browsing this forum: No registered users and 9 guests