Page 1 of 1

Home made fenders how did you do it.

PostPosted: Wed Jun 18, 2008 11:59 am
by Ron Dickey
I am building my fenders I am more utilitarian then looking for buety.

I will produce pix soon. I'll keep trying till I get them up

I will have a shelf runnign from the door to the back of the trailer above the wheel and lights. then I will drop a pc of wood in front and rear of the wheel at a slant. this will give me a ledge for cups and small things on both sides and protection from flying things from the truning wheels.
I could cover the wheeel whith a board giving it a custom look and add small storage behind the wheels.

PostPosted: Wed Jun 18, 2008 11:20 pm
by Roly Nelson
Ah yes, wooden fenders, my favorite kind. I not only built one, but two, one for each side..........:-) I am sure a plank on the top with slanting members at front and back would do to keep the mud off the sides. I have my fender construction pics on the link below. Good luck.
Roly :o

PostPosted: Wed Jun 18, 2008 11:49 pm
by Dean in Eureka, CA
Hey Pole Man...
I couldn't vote... My answer wasn't on the list.
It was easy...
Gave up a trade of 32 years and became a tinner. :lol:

PostPosted: Thu Jun 26, 2008 12:29 pm
by Ron Dickey
Tin .... there I said it

now Dean 8) is time for the Pix we want to see them fancy tin fenders with the stained glass fender skirts. :lol:

come on doen't be shy..... :thumbsup:

PostPosted: Thu Jun 26, 2008 12:38 pm
by caseydog
WoodyPerk did fenders that have flat tops and storage bins.

CD

Here is a picture of his trailer with one of the storage bins open.


http://www.pbase.com/rodnich/image/97358293

PostPosted: Thu Jun 26, 2008 12:40 pm
by Ron Dickey
Dean in Eureka, CA wrote:Hey Pole Man...
I couldn't vote... My answer wasn't on the list.
It was easy...
Gave up a trade of 32 years and became a tinner. :lol:


Image

Hey Tin Man .... those look like wood to me.

and if your "Tin Man" then Nanny must be Dorthy ;)

Poll man