my exprience with RAKA epoxy
Posted: Tue Jun 03, 2014 12:09 pmI just finished skinning my bare wood TD with RAKA 3.25oz fiberglass cloth and epoxy. I laid out all the pieces and cut them to fit, holding them in place with thumb tacks/pushpins(overlapping about 2" at all the seams). I bought the pumps to fit the epoxy bottles from RAKA(this worked great and made it really easy to mix) 4 pumps epoxy to 2 pumps hardener gave me the correct amount to work with before it started to harden to much to work with. depending on what surface I was working on I either poured it on or brushed it on and spread it out with a bondo spreader. it soaked right through the cloth and into the wood. I had no problems what so ever, it was quite easy. I had rubber gloves on the entire time I was working and mixed the epoxy in a paper or Styrofoam cup and threw it away when I was done.
