Teardrops n Tiny Travel Trailers

interstate rv metals now carries a .025 mill finish aluminum.
Comes in 48" (any length) and 100" (any length).

Unfortunately they are a wholesaler, so I'm tying to find a local company that carries their products.
http://www.interstatervmetalandsupply.c ... u_dia2.htm

I have to wonder if that thin would flap around in the wind while you're heading down the road. I wanted .04 but could only find .05 around the Pittsburgh area. Might be heavy but I've never seen it move in either heat or cold.

Art

Any luck on finding a retailer?

My all aluminum trailer is built from 0.050" aluminum over angle iron frame, and it's plenty sturdy and does not "oil can." If you are just skinning a wood trailer the 0.025" should be fine. If you're skinning, don't glue it to the underlying wood. Attach it at the edges with the trim only.

<Chas>

Marc,
Did you end up using the .025? There's a place around here that has it for a reasonable price compared to the .050 in 5' that I need.