Teardrops n Tiny Travel Trailers

I live near Kansas City, and I'm looking for some aluminum diamond plate for front end protection and to trim the trailer out a bit, but haven't had any luck locally (Lowe's, HD, etc).

Any good sources either local or online?

Thanks for any help.

http://www.metalbythefoot.com/

A simple google search of "Metal Suppliers Kansas City" turned up a half a dozen or better.

https://www.google.com/search?q=metal+s ... 5179566386

Be interested to see whar you pay there.

In KS, I have seen smaller sizes of it at the Tractor Supply Store. They might have something that would work. Online, they aren't showing large enough pieces but one could still see if they might be able to get it that way.

I bought mine from metalsdepot.com. 1/8" 1' x 8' shipped to my house at $70 +/- plus shipping. Not cheap but it was just what I needed.

Hello,

You might want to look in to Ryerson. I bought a 10' x 4' diamond plate sheet for about $125.00 or $150.00. Can't remember cause I bought 3 sheets of .050" regular aluminum sheets of 5' x 10' too. They have a couple of location through out the states. Maybe there's one near you. Ryerson.com is the site.

Good Luck

Carlos

Here are 2 ft x 4 ft at Lowes

Code: Select all

http://www.lowes.com/pd_241558-37672-11256___?langId=-1&storeNumber=2588&city=Roeland+Park&zipCode=66205&state=KS&catalogId=10051&selectedLocalStoreBeanArray=[com.lowes.commerce.storelocator.beans.LocatorStoreBean%40a010a01]&storeId=10151&address1=4960+Roe+Boulevard&address2=

Check and see if there is a Ryerson location near you.