Flat packed down to the church in Indiana and assembled by some of the members in about 24 minutes or so...
Put the ends on and dropped the spars in...
![Image](http://tnttt.com/images/2013/pod_asm_1.jpg)
This is how it looks with all the spars dropped in and screwed into place... (shop pic)
![Image](http://tnttt.com/images/2013/pod_asm_2.jpg)
The insulation is embedded in between the spars and the skins...
![Image](http://tnttt.com/images/2013/pod_asm_3.jpg)
Side skin going on...
![Image](http://tnttt.com/images/2013/pod_asm_4.jpg)
Roof is going on...
![Image](http://tnttt.com/images/2013/pod_asm_5.jpg)
Church members checking out the pod...
![Image](http://tnttt.com/images/2013/pod_asm_6.jpg)
Pods set up on site...
![Image](http://tnttt.com/images/2013/pod_asm_7.jpg)