I'm moving along slowly. I want to use an A frame type jack to keep the outside of the tounge clean and leave room for a box if I decide I want one. The different tounge design is to push the jack away from the hitch so my pickup tailgate will clear. Mostly done on this side except mounting the axle(s) and jack. I'm still not sure where I want the hub faces so I ordered Flexiride 1400# half axles. A couple of weeks ago there was no information on them at all except that the ride height is adjustable. They showed up and I set to work measuring them up and doing a .dxf drawing. I sent that to Angib for his collection. He told me that UCF added lots of information to their site at recently. http://www.ucfamerica.com/tech.html
Southwest wheel in Texas is the only distributer that I can find. The tag on them says they are made by Axis Products in Elkhart. Thats about 150 miles from me. They were shipped to Texas and back to me. About 2000 expensive miles. I can email the .dxf if anyone wants it. Please PM me
PS. for the people that live in temperate portions of the world that red machine on the right in the second picture is a "Snow Blower" It, the Lawn Mower, the gas cans and the spare propane bottle go outside while I am making sparks.
I need a new Avatar. I'd put my dog up there but she doesn't look much like me. She's the skinny one.