Hi,
I'm looking for feedback on this trailer design. This is my preliminary concept. The trailer is 13' long and 6.5' wide. The camper is just under 8' tall.
Since the trailer needs to be light weight and have the proper tongue weight, it needs to be a custom design. I would like to have it professionally made.
I am having trouble with the trailer design. The model below has 2x3x1/16" tube steel with 2x3x1/8 for the tongue. I think this design saves some welds by using solid bars for the cross sections and gets 3"of drop.
- Can the tongue on top of the drop section of the frame?
- Is it safe?
Thanks,
Andre